Assembly Line Use FAQ Summary
1, the flow of water production line is generally from left to right or from right to left?
Generally speaking, because most people are accustomed to the right hand, pipelining should flow from left to right.
2, the faster the pipeline, the higher the capacity of it?
No, the level of capacity should depend on the operating time of the bottleneck process. It can cause many problems if you force the production line to increase speed.
3, U-type pipeline is the most suitable?
Not necessarily, production line layout must be based on product characteristics and process.
4. Is the assembly line designed to deliver products?
Not entirely, the ultimate goal is to achieve the product of "continuous value flow."
5. The faster the processing speed of the assembly, the better? How much better to buffer inventory?
No, it should be produced on demand. But the processing speed of the pre assembly can be slightly faster than the assembly speed.
6, streamline speed setting must keep constant?
In the same product class should be constant, the production of different products in the same line, there will be a change in speed.
7, the staff standing to do or sit to do reasonable?
Depending on the product.
8, the height of the pipeline and the height of the width of the machine is more reasonable?
According to the principle of ergonomic, sitting table high 65~75cm, seat 38~45 CM;